Micromeritics acknowledges the order shown on the reverse side of this document, which order is accepted subject to the following terms and conditions:

1. ERRORS AND MODIFICATIONS如果对订单有关的任何错误或遗漏已经通过MicromEritics或客户进行，因此客户应在收到此销售确认后的七天内由客户通知。否则，如图所示，顾客和微观仪所接受的订单。Micromeritics保留纠正在编写报价和规格方面做出的任何和所有印刷，计算或文书错误的权利。有关本订单的任何陈述，保证或条款，包括经销商和Micrositicics的代表。与此订单面临或本文规定的条款和条件不一致或冲突不一致，除非客户和微观学以书面形式进行并批准，否则不得修改本合同。
2. CUSTOMER’S PURCHASE ORDER FORMOrders submitted on the customer’s own purchase order form which may contain terms or conditions modifying, adding to or inconsistent with the terms and conditions herein contained will not be binding on the company, and the terms and conditions herein contained shall be the sole and exclusive terms and conditions relating to this order.
3. PRICING价格受到MicroMeritics的可能性，恕不另行通知。Micromeritics接受的最低订单是100.00美元（U.S.A.资金）。Micromeritics认证。此显示的价格不超过我们最受欢迎的客户的最高价格，如在相同条件下在类似数量上销售的物品。援引的价格须缴纳任何自然，税务或进口关税的联邦，州，市，市或其他税款所必需的任何补充，适用于所描述的设备或服务或适用于其生产，销售，分配或交付，所有这些都由购买者支付。
4. ORDERS AND ORDERING INFORMATIONAll orders are subject to acceptance by Micromeritics at its main office in Norcross, Georgia, U.S.A. Orders should be sent to Micromeritics Instrument Corporation, 4356 Communications Drive, Norcross, Georgia 30093, U.S.A. This order may be cancelled by the purchaser only upon written notice to Micromeritics, and if Micromeritics shall receive written notice of cancellation more than seven days after receipt of this order, customer shall pay to Micromeritics a cancellation charge of 25% of the dollar amount of the order, which Micromeritics and customer agree is necessary as liquidated damages and not as penalty for customer’s improper cancellation of the order, which charge the customer acknowledges as reasonable.
5. TERMS OF PAYMENTThe net amount of invoice is due and payable no later than thirty days after date of invoice, provided, however, that if Micromeritics determines in its sole discretion that the financial condition of the purchaser at any time does not justify continuation of production or shipment on the terms of payment specified, Micromeritics may require of customer full or partial payment in advance. Interest shall be charged at the rate of 1.5% per month on the unpaid balance on any monies owed Micromeritics by customer over thirty days after date of submission of any invoice.
6. SHIPMENT AND RISK OF LOSSAll prices are EXW our factory, Norcross, Georgia. In the absence of shipping directions from the purchaser at the time of order, Micromeritics will use its sole discretion as to the method and route of shipment, and Micromeritics shall have no liability for any shipment delay whatsoever. No insurance will be placed by Micromeritics on the instruments or equipment which are the subject of this order unless customer shall give Micromeritics written notice to place said insurance and in such amount as described by customer ten days prior to shipment. Risk of loss for any damage to the goods which are the subject of this order shifts to the customer upon delivery of the order by Micromeritics to the first carrier of said goods. Any claim for loss, damage or non-delivery must be rendered by the customer against the transportation company within ten days of receipt.
7. REGULATORY PROVISIONSMicromeritics certifies that it will comply with all applicable requirements of Sections 6, 7 and 12 of the Fair Labor Standards Act, as amended, and of regulations and orders of the United States Department of Labor issued under Section 14 thereof. The company will also comply with any other applicable federal, state and local laws. This cannot, however, be guaranteed in the case of equipment not manufactured by Micromeritics, but only resold by them. Equipment will not necessarily be designed or manufactured to conform to any particular ordinance or regulation, unless specifically contracted to do so. Micromeritics assumes no liability for difficulties experienced by the purchaser should any product fail to comply with any particular ordinance or regulation, or for any damages or fines occasioned thereby.
8. WARRANTY AND LIMITATION OF DAMAGESMicromeritics warrants for one year from the date of shipment each instrument which is the subject of this purchase order to be free from defect in material and workmanship impairing its usefulness under normal use and service conditions, except as stated below.

OTHER THAN THE WARRANTY HERETOFORE DESCRIBED, SELLER MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, UNLESS EXPRESSLY INCLUDED ON THE FACE OF THIS ORDER FORM BETWEEN MICROMERITICS AND CUSTOMER, AND ALL OTHER WARRANTIES ARE EXCLUDED AND DISCLAIMED.

修复部分保证没有任何缺陷in material and workmanship for ninety days from the date of shipment.

Customer acknowledges that the obligations of the aforesaid warranty will be limited as per the following conditions:

(一)某些产品销售的微粒学专业ducts of reputable manufacturers, sold under their respective brand or trade name. Micromeritics therefore makes no express or implied warranty as to such products. Micromeritics will use its best efforts to obtain from the manufacturer, in accordance with its customary practice, the repair and replacement of such of his products that may prove defective in workmanship or material. Service charges made by such manufacturer are the responsibility of the ultimate purchaser, unless otherwise agreed in writing between Micromeritics and customer.

(b) If an instrument or product which is the subject of this order is found defective during the warranty period, replacement parts may, at the discretion of Micromeritics, be sent to be installed by the purchaser, e.g., printed circuit boards, check valves, seals, etc.

(c) Expendable items, e.g., sample tubes, detector source lamps, indicator lamps, fuses, valve plugs (rotors) or stems, seals and o-rings, ferrules, etc., are excluded from warranty except for manufacturing defects. Items such as these which perform satisfactorily during the first forty-five days after shipment are assumed to be free of manufacturing defects.

(d) No instrument or product shall be returned to Micromeritics prior to notification of the alleged defect and authorization by Micromeritics to return the instrument or product. All repairs or replacements are made subject to factory inspection of returned parts.

（e）这些产品仅供质量控制，研究和实验室使用。打算将这些产品用于动物或人类的医疗或临床调查，或用于诊断目的，均可负责此类使用，并遵守联邦食品，药物和化妆品法（U.S.A.）的相关规定及其所有法规;以及国家或县的所有相关法律法规。

(f) All statements, technical information, and recommendations are based on tests we believe to be reliable, but their accuracy or completeness is not guaranteed.

Micromeritics and customer further agree that the liability of Micromeritics is limited under the aforesaid warranty to the repair, servicing and adjustment, free of charge at Micromeritics plant, of any instrument or defective part, when returned prepaid to Micromeritics’ examination discloses to have been defective. The purchaser is responsible for all transportation charges involving the shipment of materials for warranty repairs. Failure of any instrument or product due to operator error, improper installation, unauthorized repair or alteration, failure of utilities, or environmental contamination will not constitute a breach of warranty by Micromeritics, and Micromeritics will not be subject to liability therefore. The materials of construction used in Micromeritics’ instruments and other products were chosen after extensive testing and experience for their reliability and durability; however, it is agreed that these materials cannot be totally guaranteed against wear and/or decomposition by chemical action (corrosion) as a result of normal use.

在Micrositicics和客户之间进一步商定，Microseritics不对任何其他产品的任何后续或其他损害负责，除了如上所述的修复，服务和调整的任何产品。

THIS STATES MICROMERITICS’ ENTIRE LIABILITY WITH RESPECT TO THE SALE OF ITS PRODUCTS PURSUANT TO THIS SALES CONFIRMATION.

9. 专利If any article subject to this order is manufactured to purchaser’s specifications and design, and such design or specification, or the process of its fabrications is covered by a patent, the purchaser’s acceptance of this sales confirmation will constitute an agreement to hold Micromeritics harmless from any action, cost or expense occasioned by any infringement by the company of such patent or patents held by either customer or any third party in the performance of this contract, and customer agrees to hold Micromeritics harmless from any such patent infringement action. This hold harmless and indemnity applies to goods modified by Micromeritics at the request of the customer, as well as for goods manufactured specially to the customer’s specifications.
10. DELIVERYShipping dates are approximate and based on the prompt receipt of all necessary information by Micromeritics. Micromeritics shall not be liable for any delay in production or delivery, or loss of damage due to delay or failure to make delivery in any event, including but not limited to delay or failure caused by fire, strikes, civil or military authority, war, hostilities, government control, restrictions or prohibitions, the failure of Micromeritics suppliers to make reasonable delivery of materials or components, or other causes beyond a reasonable control of Micromeritics. In case of such delay, the date or dates of the completion of this order shall be extended for a period equal to the time loss occurring by reason of such delay.
11. 诉讼费用In the event that Micromeritics shall be required to employ counsel in order to collect the money due under this order, customer agrees that it shall pay Micromeritics reasonable attorneys’ fees not to exceed 25%, in order to compensate Micromeritics for having to employ counsel for collection.
12. ASSIGNMENTMicromeritics may assign this order or any portion thereof for performance by a third party, but Micromeritics shall be responsible for proper completion of the order under the terms of this order form in the event of such assignment.